Introduction

MoS₂ Technical Fine Grade has strong corrosion resistance, compression resistance, high vacuum resistance, radiation resistance and adhesion to metals. 

MoS₂ Technical Fine Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS₂ Technical Fine Grade can be lubricated for a long time in the air below 350 ℃.

With more than ten years of research and development experience, it can provide an annual output of 550 tons of MoS₂ Technical Fine Grade as a patented technology product.

MoS₂ Technical Fine Grade is a lubricant grade of molybdenum disulfide (MoS₂). Typical MoS₂ content (calculated average) is 98.5%.

Chemical Specifications of MoS₂ Technical Fine Grade：

*Acid number is determined at time of production. Prolonged storage will result in slight oxidation,which will produce an increase in acid number.The smaller particle size grades are more susceptible to surface oxidation.Acid number is expressed as an absolute value and is the mg of  KOH required to neutralize the acid in a one-gram sample.

Particle Size Specifications of MoS₂ Technical Fine Grade By Microtrac：

Typical Particle Size of MoS₂ Technical Fine Grade By Microtrac By Fisher Sub-sizer and Bulk Density:

Packaging of MoS₂ Technical Fine Grade：

Figure 1: Workpiece (surface sprayed with MoS₂ Technical Fine Grade)

Figure 2: Packaging of MoS₂ Technical Fine Grade .