Introduction

MoS₂ can be used at temperatures from -60°C to 400°C. MoS₂ is known as "the king of advanced solid lubricants".

MoS₂ is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS₂ can be lubricated for a long time in the air below 350 ℃.

With more than ten years of R&D experience, it can provide an annual output of 1,000 tons of MoS₂ as a patented technology product.

MoS₂ is a lubricant grade of MoS₂ available in three grades-Technical, Technical Fechnical Fine, and Super Fine.Typical MoS₂ content (calculated average) is 98.5%.

Chemical Specifications of MoS₂：

 *Acid number is determined at time of production. Prolonged storage will result in slight oxidation,which will produce an increase in acid number.The smaller particle size grades are more susceptible to surface oxidation.Acid number is expressed as an absolute value and is the mg of  KOH required to neutralize the acid in a one-gram sample.

Particle Size Specifications of MoS₂ By Microtrac：

Typical Particle Size of MoS₂ By Microtrac By Fisher Sub-sizer and Bulk Density:

 
Packaging of MoS₂ ：
 

Figure 1: Crystal structure of monolayer MoS₂ （Monolayer molybdenum disulfide crystal structure）

Shown：A layer of molybdenum atoms (blue) sandwiched between two layers of sulfur atoms (yellow)

Figure 2: Applications of MoS₂ （Molybdenum disulfide application diagram）

Molybdenum Disulfide Powder are widely used in Lubricant , Plastic modification , Grease , Brush , Valve guide and Brake pads.

Figure 3: Packaging of MoS₂  （Molybdenum disulfide packaging diagram）